ForgeNEX

2 Gbps fiber: why your PC doesn't go past 940 Mbps and how to fix it

You sign up for 2 Gbps but your PC stays at 940 Mbps. The bottleneck is usually in the network card, the cable or the switch. We explain how to detect it and fix it.

4 min read

In this article

The leap to 2 Gbps: an opportunity your local network may be wasting

ISPs already sell 2 Gbps fiber, but many users discover that their equipment doesn't reach that speed. Instead of the 2 Gbps they signed up for, the PC stays at around 940 Mbps symmetrical. The reason? Some element of the local network is still anchored in Gigabit. For a small business, this isn't just a technical curiosity: if you pay for 2 Gbps and don't take advantage of it, you're throwing money away. In addition, that bottleneck can affect productivity if you work with large files over the network or backups.

In this article we review the key points you should check to make the most of your connection, with a practical approach for IT teams and small businesses.

Illustrative detail: Why your 2 Gbps fiber only reaches 940 Mbps on the PC and how to fix it

How to identify the bottleneck

The first thing is to check your PC's link speed. In Windows 11, go to Start > Settings > Network & Internet, click on Properties of your Ethernet connection and look for the Link speed (Receive/Transmit) section. There you'll see whether it negotiates at 1 Gbps, 2.5 Gbps or 10 Gbps. That figure indicates the physical link, not a speed test. If it shows 1 Gbps, you already know where the limit is.

If the router syncs at 2 Gbps but the PC only at 940 Mbps, the problem is in the network card, the cable, the switch or the computer's port. If the speed is low both at the router and at the PC, there could be a line or ISP configuration problem. And if it works fine over cable but not over Wi-Fi, the issue is coverage or wireless configuration.

The three elements you should check

1. Multigigabit network card

To exceed 940 Mbps, your PC needs a network card compatible with the 2.5GBASE-T, 5GBASE-T or 10GBASE-T standards. Many machines, even recent ones, include Gigabit ports. If that's your case, you'll need to add a Multigigabit network card (for example, via USB or PCIe) or change equipment. In a small business, it's advisable to review the specifications of the workstations that will need that extra bandwidth.

2. Network cabling

The cable must have four pairs of wires and be Cat 5e or higher. The good news is that 2.5G technology can work over Cat 5e, which avoids redoing all the cabling. However, at ForgeNEX we recommend Cat 6 or higher due to its low cost and higher quality. If you're cabling an office, consider FTP (shielded) cables to reduce interference, even if they're somewhat stiffer. A defective or badly crimped cable can make the link negotiate at 100 Mbps, so check that all connectors are in good condition.

3. Multigigabit switch

If you use a switch to expand ports, it must also support Multigigabit. A Gigabit switch will limit the speed of all devices connected to it. ISPs usually provide routers with Multigigabit ports, but this isn't always the case with switches we add ourselves. Check the specifications before buying.

Beyond speed: the impact on small businesses

Signing up for 2 Gbps makes sense if your IT team is going to be able to take advantage of it. In a small business, the bottleneck doesn't only affect download speed: it can also slow down backups, cloud synchronization or access to remote servers. That's why, before making the leap, it's advisable to take an inventory of the local network: network cards, cables, switches and routers. An analysis that can prevent frustrations and unnecessary expenses.

Also, don't forget that Wi-Fi is another world. Even if you have 2 Gbps over cable, the wireless network may not reach those speeds. For workstations that require maximum stability, the best option is to use cable.

Practical recommendations from ForgeNEX

  • Audit your local network: check the link speed of the equipment that will need 2 Gbps. Not all of them have to need it.
  • Prioritize cabling: if you're going to cable, install Cat 6 or higher. It's a minimal investment for the future.
  • Update drivers and firmware: sometimes a negotiation problem is solved with an update of the network card driver or the router.
  • Don't force the speed manually unless you know what you're doing; always use Auto Negotiation. If forcing 2.5 Gbps causes the connection to drop, go back to the automatic configuration.
  • Test with another cable and another port before assuming the problem is with the ISP.

In short, 2 Gbps fiber is a reality that can bring value to your small business, but it requires the local network to be up to the task. If you need help diagnosing your infrastructure, at ForgeNEX we can give you a hand.

Source: RedesZone. Analysis and adaptation: ForgeNEX.

Keep reading

Call us WhatsApp