Neither glued to the router nor at the other end: where to place your equipment
Sticking your laptop or console next to the router doesn't improve the signal: it creates interference and heat. We tell you what distance and location suit your small business.
5 min read

In this article
The myth of moving the device closer to the router
It's a scene that repeats in many offices and at home too: the laptop, the console or the TV set-top box end up piled next to the router, convinced that the closer they are, the better the signal will reach. RedesZone makes it clear and we subscribe to it from our support experience: it doesn't work that way. There's no magic number of centimetres or metres that works for every space, but there is a common-sense rule: neither touching the router casing nor at the opposite end of the home or office.
The reasonable distance depends on the size of the space, the number of walls the signal passes through, the type of device and the band you use. In a small flat, a few metres already make a difference in stability. In large premises or with several floors, what matters isn't the exact metres but the line of sight: the fewer obstacles between router and device, the better the network performs.
The two problems of having devices glued to the router
When you place other electronic equipment right next to the router, two specific effects appear that degrade the connection: electromagnetic interference and overheating of the equipment itself. Leaving the TV set-top box, a smart speaker or the mobile phone touching the casing multiplies the risk of both occurring at once.
The worst part is that the symptom isn't always obvious. You can still see the wifi icon connected on your phone and, even so, suffer occasional drops or a speed well below what you pay for without understanding why. Before considering changing equipment or your plan, moving the router a few centimetres away from other devices is usually the fastest and cheapest solution.
Interference: when waves compete
Routers emit in radiofrequency bands that they share with other household devices. DECT cordless phones, Bluetooth speakers or the television itself work on similar frequencies, and the closer the emitters are, the more likely the waves are to overlap and packets to be lost. The typical result: unstable connection, micro-drops or real speed far below what you pay for, even though the device still shows it's connected.
A useful clue: if the drops repeat almost always at the same time, coinciding with the use of a nearby appliance or device, the problem is probably there and not with the internet provider. The first logical step is to move the devices a few centimetres away before calling technical support.
Heat: the router also needs to breathe
Routers are designed to run switched on 24 hours a day, but that doesn't mean they don't generate heat. If you stack devices on top, put it in a drawer or leave it stuck to the back wall of the television, you block its ventilation grilles without realising. Overheating makes the internal components reduce their performance to protect themselves, which translates into a slower connection than usual. In the most extreme cases, the equipment restarts on its own and cuts the connection for the whole office for a few seconds for no apparent reason. Over time, moreover, constant heat shortens the useful life of the components.
The opposite problem: too much distance
Moving too far away also has a cost. As you move away from the router, the wifi signal strength drops progressively, and it's not just metres that count: brick walls, concrete ceilings, mirrors and even pipes act as barriers that absorb or reflect the waves. In a small business with several rooms or thick partitions, this translates into areas where the laptop barely works while the rest of the office is fine.
The 5 GHz band offers more speed at short distance, but it loses range sooner than 2.4 GHz as soon as walls get in the way. It's worth bearing this in mind when deciding which network you connect each device to: fixed equipment that needs bandwidth can go on 5 GHz if it's close, while distant devices or ones with obstacles will appreciate 2.4 GHz.
What this means for a small business
At ForgeNEX we come across this type of incident more often than we'd like. A user reports drops, the provider says the line is perfect and, in the end, the router is hidden in a metal cabinet in the office with the switch on top and a Bluetooth speaker ten centimetres away. The conversation changes when the physical location is reviewed before touching configuration or contracting more bandwidth.
Our practical recommendation for IT teams and small business managers:
- Clear the router. Nothing on top, nothing stuck to the back wall, nothing inside closed furniture. A hand's width of air around it prevents scares.
- Separate the emitters. DECT phones, Bluetooth speakers, televisions and set-top boxes shouldn't share physical space with the router.
- Prioritise line of sight. In offices with several rooms, placing the router at a central, elevated point usually gives better results than chasing exact centimetres.
- Check before escalating. If there are micro-drops, check the location and surroundings of the router before opening a ticket with the provider or changing your plan.
- Document the installation. In a small business, knowing where the router is and what's around it prevents every incident from turning into an investigation from scratch.
This kind of physical network hygiene fits with the philosophy we apply in other areas: before adding layers of complexity, make sure the basics are right. It's the same logic we defend when talking about AI agents in the SOC or when assessing when it's worth renewing hardware, as we discussed in the analysis of the Samsung 990 Pro: the investment makes sense when the foundation is sorted.
Conclusion: common sense before exact figures
Don't look for the perfect distance in centimetres because it doesn't exist. Look for a middle ground: neither glued to the router nor at the other end, with air around it, away from other devices that emit or accumulate heat and with as few obstacles as possible between the equipment and the devices. In most offices and homes, those adjustments cost zero euros and solve more incidents than it seems. Before investing in repeaters or changing operator, check where the router is placed. Many times the problem isn't the speed you pay for, but where you've put the equipment.
Source: RedesZone. Analysis and adaptation: ForgeNEX.
Keep reading
- AI Agents in the SOC: When to Give Them Real Autonomy20 November 2026
- The hardware store owner's trick to insulate the roller shutter box and save on heating19 November 2026
- Cybersecurity and AI: the investment that boosts your results18 November 2026
- AI Pentesting: 15 Questions Before Choosing a Vendor18 November 2026
- AI Agents Hunt for API Keys in Exposed Apps: Stolen Keys17 November 2026